As per the kids who can use this ball, it is designed for users who’re 3+ years of age. Children can play with this ball, and when it is quite soft, they can learn the art of blocking as well as heading a soccer ball without hurting themselves. Finally, it comes in 4 different colours as in addition to Blue/Black, customers can purchase it in Orange/Black, Yellow/Black, and Orange/Blue colour combination.
This soccer ball by American Challenge comes in three different vibrant colors, lemon yellow, lime green and orange. This is a great soccer ball for your young kid as the outer covering is made from high grade thermoplastic polyurethane. Even more sustainable, the backing material is made up of two layers of poly and cotton lining. The inside of this American Challenge Soccer Ball, also known as the bladder, is composed of Hybrid SR and retains air for up to two to four weeks. This is amazing, as your young kid is sure to play with this colorful ball often.
This year, the ball shouldn’t have that kind of impact on which team wins the World Cup. In wind tunnel tests, Goff found that Telstar 18 has a very similar aerodynamic profile to the 2014 Brazuca ball, which flew without the wobbles of the Jabulani. The Jabulani was the first ball to have six seams and despite having a roughened surface, it was too smooth, says Goff. When the Brazuca was released, it had 68 percent more seams than the Jabulani to help change the airflow around the ball. The Telstar 18 is even more improved. Instead of transitioning to laminar flow in the middle of free kicks, Goff found that the Telstar 18 goes through its drag crisis at a lower speed of 38 miles an hour.
The outer casing of a soccer ball is composed of panels made from synthetic materials, such as PVC, PU, or a combination, sewn or glued together. Soccer ball casings are rarely leather anymore, since leather tends to absorb moisture making the ball heavier and not perform as well. The number of panels or sections of the outer casing varies according to design. Most professional soccer balls are the 32-panel design. More panels mean a rounder and stabler ball, and a more accurate flight.
However, in Goff’s wind tests, he and his team noticed that the Telstar 18 had a little more resistance at high speeds, and predict that the ball will go about eight to nine percent less distance down the pitch on long kicks. This means that Manuel Neuer, the goalkeeper for Germany who was considered to be the x-factor that brought Germany the win in 2014, might not have quite as much of an impact clearing balls from the goal this time around Goff says. “You’d see him just kicking the ball way, way down the pitch, and [this World Cup] you might notice that some of those kicks aren’t quite as long as before,” Goff says.
It is also a good idea to clean your soccer ball after you have finished using it. Although regularly cleaning a soccer ball can be a time-consuming chore, it will extend the life of the ball’s cover. The grit, dirt, and debris that the ball can pick up on any pitch impacts the panels and stitching with every rotation. So clean it thoroughly and then allow it to dry for the best possible results.
Adidas started to make soccer balls in 1963 but made the first official FIFA World Cup ball in 1970. This is the first ball used in the World Cup to use the Buckminster type of design. Also, the first ball with 32 black and white panels. The TELSTAR was more visible on black and white televisions (1970 FIFA World Cup Mexico™ was the first to be broadcast live on television).
You should also try to keep the ball at the correct pressure. Do not over or under pressurize a soccer ball. Use the manufactures recommended air pressure that is printed on most balls. Most soccer balls have a pressure rating of 6 to 8 lbs. or 0.6 or 0.8 BAR. It is recommended that you use a pressure gauge to measure the exact amount of pressure in a ball after inflating and before use. It can also be a good idea to deflate the soccer training ball after use to reduce the pressure on the seams and stitching. Reflate the ball to the appropriate pressure before using it for a game or training.