It depends on its intended use. Soccer ball casings are made from three kinds of synthetic materials. Polyvinyl carbonate (PVC) which is what most less expensive training balls are made from, Polyurethane (PU) which is the preferred ball for soccer tournaments, and a combination of the two. There are also foam and rubber training soccer balls for kids. Some kids' soccer balls are made of 100 percent thermoplastic polyurethane (TPU), which is a kind of foamy casing material so the ball is very soft. There are greater and lesser grades of each kind of material. PU-covered balls are generally softer, livelier, and have a better feel to them, and are what most people seek when looking for a optimal performing soccer ball.
The most modern feature is an embedded NFC chip, which is found on the top of the ball. If you download a free app on iOS or Android, you can personally interact with the ball's exclusive content and location-specific challenges. You'll also be able to participate and enter competitions and World Cup-related challenges. Of course, you can record and upload your experiences for social media posterity.
There are a lot of options available in the market. But before buying one, you need to ask yourself, whether you are going to use it for practice, official match, indoor playing, street playing or playing on the beach. You also need to know the actual size you need. We tried to cover all these topics including the construction of a ball so that you have the idea of the different materials that are used to make it, and which material plays what type of role in the performance of your best buddy on the ground. Hope you enjoyed reading our detail reviews and soccer ball buying guide. Now it’s your turn to take the right decision.
Adidas says its design was motivated by Russia's urban landscapes. It uses textured graphics and a metallic sheen to bring a modern look to the classic design. The ball is made of six panels of thermally bonded TPU and about 15% silicone. The materials allow for better trajectory, accuracy, responsiveness, and low water absorption. It also feels well-padded and slightly lighter than previous match balls.

“We found that the grooves and pimples on the Telstar 18 ball are very orderly and a little bit flat,” says Alam. The pimples that texture the surface of the ball are not as raised as on the Brazuca, and the seams are narrower and shallower than they have been in the past. All of the elements of the ball—the increased seam length, the more regular pimple pattern, orderly pimple and seam shape—add up to a more symmetrical, balanced ball, Alam says. “We expect this ball to have better flight stability.” And since all 11 stadiums in Russia are at the same altitude, Alam says the ball should play the same way across all matches.

This size ball, the smallest aside from mini-balls not used for real practices or games, weighs 10 oz. and can be used for players under 8. The No. 3 ball is only 24 inches in circumference and thus doesn't come up as high on the leg as an adult model. You don't need to provide a match-quality ball for your young player, write the authors of "The Complete Idiot's Guide to Coaching Youth Soccer."
Despite the similarities with the Brazuca, the few differences between this ball and what players have gotten used to over the last four years will have an impact on play, says Firoz Alam, an aerodynamics engineer at the Royal Melbourne Institute of Technology in Australia, who has also performed wind tunnel tests on the Telstar 18. “When the player is making a short pass, they have to push a little harder, because at less then 60 kilometers per hour [or 37 miles per hour]it has more flight resistance than the Brazuca,” says Alam. The mid-range passes and corner kicks that gave the Jabulani so much trouble have been resolved. Compared to the Brazuca, the Telstar 18 is also more aerodynamically efficient in the 40-50 mile an hour range, so Alam says players will actually have to kick a little softer or they’re likely to overshoot. Over 55 miles an hour the two balls will feel very similar.
Adidas says its design was motivated by Russia's urban landscapes. It uses textured graphics and a metallic sheen to bring a modern look to the classic design. The ball is made of six panels of thermally bonded TPU and about 15% silicone. The materials allow for better trajectory, accuracy, responsiveness, and low water absorption. It also feels well-padded and slightly lighter than previous match balls.

For the most part, soccer balls are pretty affordable. Training soccer balls for kids start at under $10, and for around $60 or less, you can get a good, league-approved tournament soccer ball. Of course there are more expensive ones, depending on what you're looking for. Cost depends on the type of ball, materials, quality, and also the outlet you buy from. Our soccer balls can be bought economically in sets of six or more, or singly. Shopping online at Epic Sports can save you up to 60 percent if not more off retail prices on your favorite brands.
New! 2018 FIFA® World Cup Russia Telstar Mechta Ball: Get your own official knockout stage ball, designed with a new red color to represent the host country. While the Telstar Mechta features an intensified look, it has the same high-quality construction as the Telstar 18 ball used in the group phase. Mechta means “dream” or “ambition” in Russian, honoring both players’ and fans’ FIFA World Cup ambitions.
The Wilson Soccer Ball comes in three different sizes as depending on your age group; you can purchase this product without any hindrance. It is machine-sewed with 32 different panels stretching all over its surface. The cover is made of synthetic leather which gives you a nice feel when you kick this ball. Furthermore, it is a durable product which is devoid of regular wear and tear.
The highest in cost, top match balls for elite soccer players are constructed with a supreme quality cover, backing, and bladder for the most predictable flight pattern and striking ability. Some of the most impressive official match balls on the field are made with the threadless, seamless, beveled edge (TSBE) technology which provides a seamless surface for touch and less water uptake to stay in control. adidas soccer balls that pass a demanding series of tests, set by FIFA, on the shape, weight, performance, rebound and water absorption have the highest ranking a soccer ball can get. Most adidas training and pro match balls are FIFA approved so you can lead the charge down the pitch.
×