Despite having so many good reviews from the users, why aren’t we keeping Wilson traditional ball on our list? It is because we strongly think Wilson is specialized in making tennis equipment. On the other hand, this model did not meet our expectation. This model seems too heavy to us, and overall feel was not too good. That is why we are not recommending you to go for this option. But obviously, the final decision is yours. So many people are still buying this 🙂
Using a wind tunnel, Goff has researched the flight properties of the Telstar 18, drawing its drag curve to discover where the ball might dip and swerve in the air, similar to the knuckleball free kicks favored by Cristiano Ronaldo “Even if aerodynamically the Telstar 18 isn’t that different from the Brazuca, it’s still going to wobble a little bit differently because the panel shapes are different,” Goff says.
Our main intention of discussing the different types of balls is to educate you so that you can buy the right product. For example using practice balls on the street will bring you no good but some awful experiences as the ball will not last long. Similarly, an indoor soccer ball is not good to play on a beach. Keep this in mind when buying, and using a ball.
Although the length of kick may end up being a little shorter, the changes make the Telstar 18 more balanced, says Alam. On other balls, Alam and his team have found that there is a difference in how the ball flies based on where it’s kicked in relation to the seams. His tests have found that the Telstar 18 ball doesn’t have as much variation. The total length of seam of the Telstar 18 is 14.1 feet, 3.28 feet more than on the Brazuca. With the longer seam, and more symmetric panels, no matter how the ball is turned there is the same amount of seam exposed. “The other two balls were not like that, they were significantly different,” he says.
Changes in temperature will also affect the inflation level of the soccer ball. Extreme heat or extreme cold will alter the shape of the bladder and this will affect the integrity of the soccer ball. Although it doesn’t seem like you could reach an extreme temperature that could do this to a soccer ball, just leaving a ball in your trunk or the back of a van on a hot Summer’s day will do it.

For the most part, soccer balls are pretty affordable. Training soccer balls for kids start at under $10, and for around $60 or less, you can get a good, league-approved tournament soccer ball. Of course there are more expensive ones, depending on what you're looking for. Cost depends on the type of ball, materials, quality, and also the outlet you buy from. Our soccer balls can be bought economically in sets of six or more, or singly. Shopping online at Epic Sports can save you up to 60 percent if not more off retail prices on your favorite brands.
Perfect working condition, see attached pictures for excellent condition, comes with original box, all paperwork, charging dock, and cord included, All original/ All Authentic My son loves this ball but has moved on to a personal trainer, this ball is tested and works perfect, just download the app- paperwork included Size 5 Adidas micoach smart ball, soccer ball I will ship within 24 hours after payment is made, get it before Christmas! 100% feedback, smoke free/ pet free home

When it comes to the training soccer ball, it can be purchased at a much-reduced price as compared to the actual match-ball. Incorporating inferior quality materials in its construction, this is an ideal equipment for the sake of training. So if you’re looking for any such ball to sharpen your skills, have a look at the Adidas Champion’s League Finale Capitano Soccer Ball.

What is the best soccer ball and where to find it? If you’re looking for the answer to these questions, we’ve got you all covered. We’ve prepared this guide, after thorough research, for all those football fanatics who want to purchase the best possible equipment when it comes to playing soccer. Because it doesn’t matter whether you’re an amateur footballer or even a professional athlete, playing with the best soccer ball can make all the difference.

The ultimate determination is how a soccer ball feels and performs for you on contact. A good soccer ball will not only be tough enough to hold up to your fast and furious play, it will feature a soft casing for comfortable heading, and durable stitching (if stitched). It should handle well, and have good response. Most good soccer game balls feature a poly-urethane (PU) casing. Most leagues prefer 32-panel designs for its performance value. Also check for a warranty. Your new soccer ball should come with a manufacturer's warranty against defects and damage caused by normal play.


This soccer ball by American Challenge comes in three different vibrant colors, lemon yellow, lime green and orange. This is a great soccer ball for your young kid as the outer covering is made from high grade thermoplastic polyurethane. Even more sustainable, the backing material is made up of two layers of poly and cotton lining. The inside of this American Challenge Soccer Ball, also known as the bladder, is composed of Hybrid SR and retains air for up to two to four weeks. This is amazing, as your young kid is sure to play with this colorful ball often.
All in all a street soccer ball needs to be rough and tough with all the attributes we discussed so far. Senda street soccer ball has fulfilled all these requirements, and met our expectation. We recommend you to buy this option if you want to play on street or hard surface. We found this as a good quality model with the proper construction as we discussed. The weight and bounce are also according to the requirement of a street soccer ball.

With the increased seam length, Goff says there was actually a risk that this ball would be too rough. “Very little changes in those textures can have noticeable aerodynamic effects,” he says. The fact that the Telstar 18 has almost the same drag curve as the Brazuca, with aerodynamic properties changing at about the same speeds, is impressive. “It has to be an engineering and technical challenge,” he says.

In 2010, the infamous Jabulani balls for the World Cup in South Africa transitioned from turbulent to laminar flow between 50 and 45 miles per hour, right at the speed for corner and free kicks. The transition between these different types of flow causes even more drag on the ball, which caused the Jabulani to wobble in the air and drop in ways that players weren’t expecting.
2018 FIFA World Cup Russia Telstar Official Match Ball: A throwback to the classic Telstar ball used during the tournament in 1970, the 2018 version features a thermally bonded six-panel design to maximize flight and pace with pixilated detailing for a modern aesthetic. The 2018 official match ball also comes with an Interactive Near Field Communication (NFC) chip that allows you to interact with the ball through your smartphone.
Wilson is a classic sports company that gives you just about everything that you need in a soccer ball. This ball has a synthetic leather cover which is soft to the kick, but also has enhanced ball durability. It has a butyl rubber bladder to hold the air which gives the ball its shape and and retains the air. This has the classic black and white panel colors.
In 1937, the regulation soccer ball put on a little weight, increasing from 13-15 ounces to 14-16 ounces. Soccer balls used to be made exclusively of leather. Not so these days! Current technologies have come up with leather-like synthetic materials that are softer, more lightweight, water-proof, and perform as well if not better than leather soccer balls. As for the look, early soccer balls were tan but difficult to see from the stands; although white leather-washed soccer balls are known to have been used. White soccer balls replaced their tan predecessors in the 1950s, and were composed of 18 panels. Black spots were added to allow soccer players to track the ball's swerve. Today's soccer balls come in an array of colorful designs and styles to suit every player.
With the exception of the Wilson Traditional soccer ball, each of the soccer balls above is unique. Not only by the bold colors and detailed designs but the machine stitching technology that has sewn the panels together. Kids can benefit greatly from having a soccer ball that stands out because it will encourage them to learn more about soccer so that they can really use their cool, unique soccer ball. A unique ball will also distinguish their ball from many others at soccer practices and camps.
While this ball is absolutely adorable and feels like it's a good quality, I'm disappointed with the one I received. It has little chips in the design—there are a few little white marks in the sections that are orange. Also, there is some sort of sticky stuff on the ball, almost like residue from an old sticker. I can probably remove it with Goo-Gone... I'm just not thrilled that it seems to be used or at least bought and returned. While I'm sure my nephew will love it for his 1st birthday party tomorrow, I'm mildly embarrassed to give it to my brother and his wife because of the appearance. If the party weren't tomorrow, I'd return / exchange it. Frustrating!
You should also try to keep the ball at the correct pressure. Do not over or under pressurize a soccer ball. Use the manufactures recommended air pressure that is printed on most balls. Most soccer balls have a pressure rating of 6 to 8 lbs. or 0.6 or 0.8 BAR. It is recommended that you use a pressure gauge to measure the exact amount of pressure in a ball after inflating and before use. It can also be a good idea to deflate the soccer training ball after use to reduce the pressure on the seams and stitching. Reflate the ball to the appropriate pressure before using it for a game or training.
Nike asks you to accept cookies for performance, social media and advertising purposes. Social media and advertising cookies of third parties are used to offer you social media functionalities and personalized ads. To get more information or amend your preferences, press the ‘more information’ button or visit "Cookie Settings" at the bottom of the website. To get more information about these cookies and the processing of your personal data, check our Privacy & Cookie Policy. Do you accept these cookies and the processing of personal data involved?
On the other hand, replicas (sometimes called training balls or gliders) are designed to be just like the official match balls but are much cheaper. Their panels are often stitched rather than thermally-bonded and are made of a different material. However, they’re not necessarily less durable than official match balls. So, they’re the recommended option for most players. https://www.youtube.com/watch?v=j2Xn84L3Kcs
×